Panasonic EBL128

Panasonic Eco Solutions Nordic AB
MEW01623 Rev: - EBL128 Operating Instructions V2.0.x
86
25.1 Disable zone (H2/B1)
When a whole zone is disabled, all alarm points within the zone are
disabled excluding the addressable manual call points.
70
All zones can be disabled. Disabled zones are listed in menu H4/U1.
Disabled zones can be automatically re-enabled or they have to be re-
enabled via menu H2/B5.
Action
Text in display
Comments
"Access"
According to chapter
"Access", see page 81.
Scroll to menu H2.
Disable or re-enable
ACCEPT? H2
"A"
Disable zone
ACCEPT? B1
"A"
Disable zone: 00
ACCEPT?
Write zone number, e.g.
"01"
Disable zone: 01
ACCEPT?
Press "A" to accept.
"A"
Automatic re-enabling:0 (0=No,1=Yes)
Time: HH:MM ACCEPT?
Press "1" for aut. re-
enabling and accept or
change the time (max. 24
hours). Press "A" to
accept.
LED "Disablements" (L8)
will light up.
(Default is current time + 3 hours)
"A"
Zone 01 is disabled
"A"
Disable zone: 00
ACCEPT?
If more disablements shall
be done, continue like
above. If not, press
"Return" to menu B1.
"Return"
Disable zone
ACCEPT? B1
Scroll or press "Return" to
menu H2.
"Return"
Disable or re-enable
ACCEPT? H2
Scroll or press "Return".