Panasonic EBL128

Panasonic Eco Solutions Nordic AB
MEW01623 Rev: - EBL128 Operating Instructions V2.0.x
143
33 Change password (H10)
The password can be changed for the user (user name) that is logged
in but it is recommended to do it via EBLWin instead.
Action
Text in display
Comments
"Access"
According to chapter
"Access", see page 81.
Scroll to menu H10.
Change password
ACCEPT? H10
"A"
Password: _
New password: Verify:
Enter the old and new
passwords and the new
password again.
Password: ******
New password: ****** Verify: ******
The digits are replaced
(******) in the display.
Incorrect password, NO change
Wrong password was
entered. Try again.
Password is changed
Correct password was
entered.
"Return"
Change password
ACCEPT? H10
Scroll or press "Return" to
log off.
As long as you don't close the door you can enter the menu system again
without a password.
NOTE! After change of password it is recommended do a "Safe
shutdown of the control unit" (see menu H8/S7). This will save the
SSW data (e.g. the new password) in a Flash ROM (see page 77).
If the valid password(s) are unknown, EBLWin has to be used to
change the password(s).