Panasonic EBL128

Panasonic Eco Solutions Nordic AB
MEW01623 Rev: - EBL128 Operating Instructions V2.0.x
23
7 User level, User name & Password
EBL128 has different user levels for different kind of users.
To log on to an EBL128 (version > 2.0) a User name and a Password
are required (see page 81). Ten different User names with individual
Passwords can be used. Each User name is for a specific user level,
which has access to specific menus according to the following table.
User level
according
to EN54-2
User level name /
type
Required action /
equipment
Access to
1
-
No. (Hole in the
Plexiglas.)
Alarms queued
button.
2A
-
Fire brigade key. (To
open the door.)
Like 1 + Silence
buzzer, Silence
alarm devices &
Reset buttons.
2B
Information only
Like 2A + log on as
“Information only”
Like 2A + keypad.
Menu H4, H6
a)
,
H9
b)
& H10
2C
Building officer
Like 2A + log on as
“Building officer”
Like 2A + keypad.
H1-H4, H6, H7,
H9 & H10
3A
Service personnel
Like 2A + log on as
“Service personnel”
Like 2A + keypad.
H1-H10
3B
-
PC + EBLWin + H/W
key
SSD & S/W
download
4
-
PC + EBLWin + H/W
key + special password
SSD & S/W
download + reset
of alarm counter.
a)
Information only, i.e. the faults cannot be acknowledged.
b)
Menu H9/C1 only.
Via EBLWin (menu “System”) are ten different User names with
individual Passwords possible to define in the “User data” dialog box.
They can be used to log on to an EBL128 (version > 2.0) and/or Web-
server access. Three User names and Passwords are default:
NOTE! Initials are required in system EBL128 since they will be
used in the event log instead of the User names.