Panasonic EBL128

Panasonic Eco Solutions Nordic AB
MEW01623 Rev: - EBL128 Operating Instructions V2.0.x
134
"Alarms queued"
002 ZONE-ADDR 12-34 LAST ZONE 12 No. 01
"Alarm text for 12-34"
one alarm point is in
alarm. Press the button
"Alarms queued" (P1) to
see the other alarm.
Press "Reset" to reset the
alarm(s).
What happens when you press "Reset" is depending on:
a) if you still are in menu H8/S8 and single encapsulated reset is used
b) if you still are in menu H8/S8 and multiple reset is used or if you have left the menu
system (by pressing "Return" two times or automatically after 10 minutes).
Alternative a)
"Reset"
Activate zone/address in alarm mode
ACCEPT? S8
Scroll or press "Return" to
menu H8.
Maintenance
ACCEPT? H8
Scroll or press "Return".
Alternative b)
"Reset"
(Blank)
NOTE!
Multiple reset is default.
88
By Single encapsulated reset each point has to be reset individually.
See also chapter "Alarm reset", page 53.
88
Alarm reset method is selected via EBLWin, "Control Unit Properties",
tab "Advanced".