Panasonic EBL128

Panasonic Eco Solutions Nordic AB
MEW01623 Rev: - EBL128 Operating Instructions V2.0.x
31
The outside switch is turned OFF (i.e. from activated to not
activated state).
 The fault "FAULT: FB Silence switch active" will be
Serviced.
28
 Any alarm point / zone in fire alarm state will automatically be
disabled / isolated. (I.e. it has to be re-enabled via menu
H2/B5-B6.)
 Any alarm point / zone in fire alarm state will automatically
change state to "Isolated alarm" and in the fire alarm list
(presented in the LCD) will "ALM" be changed to "ISO".
An example:
ISO ZONE-ADDR 12-46 LAST ZONE 12 No. 01
This is a user defined alarm text.
 The c.i.e. built-in buzzer is re-enabled.
27
Always latched, regardless of if faults are programmed to be not latched.
28
Since this fault is always latched, it has to be acknowledged via menu H6.