Panasonic Eco Solutions Nordic AB
MEW01623 Rev: - EBL128 Operating Instructions V2.0.x
82
Action = what to do, e.g. use push button / key signed "Access".
Text in display = what is shown in the EBL128 (c.i.e.) display.
Comments = Comments to the text in the "Action" and "Text in
display" columns.
Use "" and "" to scroll between the main menus H1-H10.
Use "A" to accept.
Some main menus have sub menus. Use "A" to accept and then ""
and "" to scroll between the sub menus (e.g. B1-B10).
NOTE! The menus are circular, i.e. if you scroll with "" and the last
menu is reached, the first menu comes up next. It is also possible to
make "quick jumps" within each menu, e.g. in menu H1 press "6" for
a quick jump to menu H6. ("0" = menu x10).
Instead of a menu identification (e.g. B1), the letter L can be shown,
which means that it is a List. Use "" and "" to scroll in the list.
If or is shown in a menu, use "" or "" to get more
information.
Use "" and "" to move the cursor in a menu.
Use "Return" to return from a sub menu to a main menu.
Use "Return" in a main menu (H1-H10) to leave the menu system.
NOTE! You will not be logged off until you close the door or 60
minutes after the last action (i.e. if the key pad / push buttons have not
been used for 60 min.).
You will normally get some information that the action / operation
you wanted is performed, (e.g. "Output xx forced active"). If not, the
information will be "Operation failed!". (Also e.g. if you try to
disable a unit that doesn't exists in the installation.)
To Next Page
Loading...
