7.2 FP Compatible Instruction Mode Control Instruction
7-25
[Settings and program]
Set the frequency range to 191 Hz to 100 kHz and duty 1/4 (25%), and the operation mode to
Incremental and the output method to CW.
R0
H1200F1 DMV DT100
R10
DT100F174 SP0H K0
（ ）
DF
K1000F1 DMV DT102
K1000F1 DMV DT104
K2500F1 DMV DT106
K2000F1 DMV
DT108
K5000F1 DMV DT110
K5000F1 DMV DT112
K1000
F1 DMV DT114
K2000F1 DMV DT116
K0F1 DMV DT118
Supplement to pulse output operation
When outputting pulses with the PLS+SIGN (direction output) method, pulses will be output
approx. 300µs later after the output of direction signal (SIGN). (The characteristics of a motor
driver is considered.)
To Next Page
Loading...
