Panasonic KX-NS300 - 7.3 Utility-Log; 7.3.1 Utility-Log-Error Log

7.3 Utility—Log
7.3.1 Utility—Log—Error Log
Collects and displays system error information.
Whenever there is a system failure, the PBX stores the error code generated. The connected PC collects all
of these codes, along with other information, and displays an explanatory error message.
This screen can be accessed only in On-line mode.
The functions of the buttons on this screen are as follows:
Button Function
Cancel Closes the Error Log screen without saving.
Save Saves the currently displayed Error Log information as a text file.
Minor Displays minor errors, which affect only a certain part of system operation.
Major Displays major errors, which affect operation of the whole system, or result in
system failure.
Clear Erases the stored error log information from both the screen and the PBX.
Log Information Displays probable causes of the errors and their solutions.
The items displayed on screen are as follows:
Item Description
Date The date of the error detection.
Time The time of the error detection.
Error Code The 3-digit error code assigned by the PBX. For details about the error code, refer to
the "Log Information" item in this table.
Sub Code SMDR:
The 8-digit sub code of the relevant hardware (BBWXYYZZ).
Web Maintenance Console:
The 6-digit sub code of the relevant hardware (WXYYZZ).
For information about the digits of the Sub Code, refer to table "Sub Code Details"
below.
Error Message A description of the error.
Log Information Clicking this button displays a list of errors and solutions in PDF format, as shown
below.
[Sample] List of Errors and Solutions
For each error code, the error message, probable cause, and solutions are explained.
7.3 Utility—Log
PC Programming Manual 105