27.3 Network Service—[3] Client Feature
27.3.1 Network Service—[3-1] Client Feature—FTP
FTP client connection settings can be programmed. Up to 5 FTP sites can be specified for connections.
Connection 1—Connection 5
Name Description Value Range Links
Connection
Name
Specifies the name of the connection to
use for programming in other items.
Max. 64 characters
IP Address Specifies the IP address of the FTP
site. Click the IP Address radio button
when this is used.
1.0.0.0–223.255.255.255
Name Specifies the name of the FTP site.
Click the Name radio button when this
is used.
FTP site name (max. 253
characters)
Server Port
Number
Specifies the port number used to
connect to the FTP site.
21, 990, 1024–65535
User name Specifies the user name required to log
in to the FTP site.
Max. 24 characters (a–z, 0–9, $,
[hyphen], [underscore])
Note
• The first character must be a
letter or number.
• $ may only be used as the
final character.
Password Specifies the password for the user
name required to log in to the FTP site.
Max. 24 characters (A–Z, a–z, 0–9,
=, [hyphen], [underscore])
Note
The first character must be a
letter, number, or =.
Protocol Specifies the communication protocol
for the FTP connection.
FTP, FTPS (Explicit), FTPS (Implicit)
27.3.2 Network Service—[3-2] Client Feature—Syslog
Settings can be programmed for a Syslog client connection.
Name Description Value Range Links
Remote Syslog Specifies whether an external Syslog
server will be used with the PBX.
Enable, Disable
Remote Syslog
server—IP
Address / Host
name
Specifies the IP address or host name
of the external Syslog server.
1.0.0.0–223.255.255.255 (IP
address), Max. 253 characters
(host name)
27.3 Network Service—[3] Client Feature
666 PC Programming Manual
To Next Page
Loading...
