Panasonic KX-NS300 - 11.5.1.1 PBX Configuration-[3-5-1] Group-Incoming Call Distribution Group-Group Settings-Member List

Group Log / Group FWD
Name Description Value Range Links
Floating Extension
Number
Specifies the floating extension
number of the incoming call
distribution group.
Max. 5 digits
(consisting of 0–9)
Group Name Specifies the name of the
incoming call distribution group.
Max. 20 characters
Incoming Call Log
Memory
Specifies the number of
unanswered calls to the incoming
call distribution group that can be
logged in the call log memory.
0–100
Feature Manual
References
2.19.2 Incoming Call
Log
Group FWD Call
from CO—Setting
Indicates the current FWD status
for incoming trunk calls
(reference only).
Off, On
Feature Manual
References
2.3.2 Call Forwarding
(FWD)
Group FWD Call
from CO—
Destination
Specifies the forward destination
of incoming trunk calls directed to
the incoming call distribution
group.
Max. 32 digits
(consisting of 0–9, *,
#, [ ] [Secret], and P
[Pause])
Feature Manual
References
2.3.2 Call Forwarding
(FWD)
Group FWD Call
from Extension—
Setting
Indicates the current FWD status
for incoming intercom calls
(reference only).
Off, On
Feature Manual
References
2.3.2 Call Forwarding
(FWD)
Group FWD Call
from Extension—
Destination
Specifies the forward destination
of incoming intercom calls
directed to the incoming call
distribution group.
Max. 32 digits
(consisting of 0–9, *,
#, [ ] [Secret] and P
[Pause])
Feature Manual
References
2.3.2 Call Forwarding
(FWD)
11.5.1.1 PBX Configuration—[3-5-1] Group—Incoming Call
Distribution Group—Group Settings—Member List
Each incoming call distribution group can have a maximum of 128 members (extensions) assigned to it, and
each member can have its own delayed ringing and Wrap-up time settings. An extension can be a member
of multiple incoming call distribution groups. An ICD Group can also contain cellular phones, and network
ICD groups (ICD groups at other PBXs in a network) using virtual PS (see "5.2.4.6 Virtual PS" in the
Feature Manual). The forward destination assigned to a virtual PS (e.g., a cellular phone) can act as a
member of an ICD group. Select the desired ICD group (1–128) from the ICD Group No. list.
To assign members to the group, enter directly or click Extension No. Setting (see 2.1.6 Extension
Number Setting). To copy the members to another group, click Member list copy, select the group, and
click OK.
11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings
PC Programming Manual 401