Panasonic KX-NS300 - 19.3.2 PBX Configuration-[11-3-2] Maintenance-CS Synchronisation-LAN Synchronisation

Name Description Value Range Links
CS Class Specifies the classification of each CS.
This parameter can only be modified
when Connection on this screen is set
to OUS.
Sync Master CS1, Sync
Master CS2, Sync Slave
CS
Primary CS—Index Specifies the number of the primary CS. 1–16
Primary CS—Shelf Indicates the shelf number (reference
only).
1: Main unit
2–4: Expansion Unit
Virtual: Virtual card
Primary CS—Slot Indicates the slot position of the primary
CS (reference only).
Slot number
Primary CS—Port Indicates the port number of the primary
CS (reference only).
Port number
Primary CS—CS Name Indicates the name of the primary CS
(reference only).
Max. 20 characters
Secondary CS—Index Specifies the number of the secondary
CS.
1–16
Secondary CS—Shelf Indicates the shelf number (reference
only).
1: Main unit
2–4: Expansion Unit
Virtual: Virtual card
Secondary CS—Slot Indicates the slot position of the
secondary CS (reference only).
Slot number
Secondary CS—Port Indicates the port number of the
secondary CS (reference only).
Port number
Secondary CS—CS
Name
Indicates the name of the secondary CS
(reference only).
Max. 20 characters
19.3.2 PBX Configuration—[11-3-2] Maintenance—CS
Synchronisation—LAN Synchronisation
You can programme and view settings for LAN Synchronisation Groups.
Select a LAN Synchronisation Group (1-4) to programme from the LAN Synchronisation Group Number
drop-down list.
It is possible to synchronise CSs with each other within the LAN synchronisation group.
Click Sort to reorder CSs.
To open the screen described in 7.4.5 Utility—Monitor/Trace—CS Status Monitor—LAN Sync Group,
click CS Status Monitor.
LAN Synchronisation Groups can be programmed only in On-line mode.
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Note
Only KX-NS0154 IP-CSs can be added to a LAN synchronisation group.
Adding CSs
Follow the steps below to add CSs to the LAN synchronisation group.
1. Connect the CS to be registered to the network and, if necessary, the power supply.
19.3.2 PBX Configuration—[11-3-2] Maintenance—CS Synchronisation—LAN Synchronisation
560 PC Programming Manual