Panasonic KX-NS300 - 9.32 PBX Configuration-[1-1] Configuration-Slot-Port Property-E1 Port

9.32 PBX Configuration—[1-1] Configuration—Slot
—Port Property—E1 Port
Various settings can be programmed for each E1 channel. To change the status of ports, click Command.
Name Description Value Range Links
Shelf Indicates the shelf position (reference
only).
Shelf number
Slot Indicates the slot position (reference
only).
Slot number
CH Indicates the channel number
(reference only).
channel number
Connection Indicates the channel status
(reference only).
This column offers two ways to open
the screen to select the channel
command:
• Click the desired cell in the
column.
• Select the desired cell in the
column, and then click Command.
INS: The channel is in
service.
OUS: The channel is
out of service.
Fault: The channel is
not communicating with
the network.
Subscriber
Number
Specifies the number used as the
CLIP number.
Max. 16 digits
(consisting of 0–9, *,
and #)
Feature Manual
References
4.1.2.2 Calling/
Connected Line
Identification
Presentation (CLIP/
COLP)
Channel Type Selects the channel type. Undefined: Not
assigned
DR2: Digital System R2
Feature Manual
References
2.29.1 E1 Line
Service
Trunk
Property
Selects the trunk property of the E&M
channel.
Public: Use the
DIL/DDI/DID method to
distribute incoming
trunk calls.
Private: Use the TIE
line service between
two or more PBXs.
Feature Manual
References
2.1.1.1 Incoming
Trunk Call Features
—SUMMARY
4.1.2.1 Integrated
Services Digital
Network (ISDN)—
SUMMARY
4.3.1 TIE Line
Service
9.32 PBX Configuration—[1-1] Configuration—Slot—Port Property—E1 Port
PC Programming Manual 295