Panasonic KX-NS300 - Queuing Feature; Quick Dialling; Reverse Circuit; Ring Tone Pattern Selection

Feature Manual References
4.3.5 QSIG Enhanced Features
Queuing Feature
• 10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—Incoming Call Queue
Monitor
• 11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings
– Overflow Queuing Busy
– Overflow No Answer
– Queuing Time Table
– Miscellaneous—Extension No Answer Redirection Time
– Miscellaneous—Maximum No. of Busy Extension
• 11.5.3 PBX Configuration—[3-5-3] Group—Incoming Call Distribution Group—Miscellaneous
• 11.7.1 PBX Configuration—[3-7-1] Group—UM Group—System Settings—Call Waiting on UM Group
• 12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button
– Type
– Extension Number (for Hurry-up)
• 12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button
– Type
– Extension Number (for Hurry-up)
Feature Manual References
2.2.2.4 Queuing Feature
Quick Dialling
• 10.6.2 PBX Configuration—[2-6-2] System—Numbering Plan—Quick Dial
Feature Manual References
2.6.5 Quick Dialling
Reverse Circuit
• 9.24 PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO Port—Reverse Detection
Feature Manual References
2.5.4.5 Reverse Circuit
Ring Tone Pattern Selection
• 10.8.1 PBX Configuration—[2-8-1] System—Ring Tone Patterns—Call from CO—Ring Tone Pattern Plan
1–8
• 10.8.2 PBX Configuration—[2-8-2] System—Ring Tone Patterns—Call from DOORPHONE—Ring Tone
Pattern Plan 1–8
• 10.8.3 PBX Configuration—[2-8-3] System—Ring Tone Patterns—Call from Others—Extension—Ring
Tone Pattern Plan 1–8
• 10.9 PBX Configuration—[2-9] System—System Options—Option 1—PT Operation—PT Ring Off Setting
Feature Programming References
722 PC Programming Manual