Panasonic KX-NS300 - Making a TIE Line Call; Malicious Call Identification (MCID); Manager Features; Message Waiting

– Extension Number (for Log-in/Log-out)
• 19.1 PBX Configuration—[11-1] Maintenance—Main—SMDR—Print Information—Log-in / Log-out
Feature Manual References
2.2.2.8 Log-in/Log-out
Making a TIE Line Call
• 10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—TIE Line Access
• 17.1 PBX Configuration—[9-1] Private Network—TIE Table—Own PBX Code
Feature Manual References
4.3.1.1 Making a TIE Line Call
Malicious Call Identification (MCID)
• 10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—MCID
Feature Manual References
4.1.2.9 Malicious Call Identification (MCID)
Manager Features
• 10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—Manager—Manager
• 19.1 PBX Configuration—[11-1] Maintenance—Main—Password—Manager Password - PT Programming
—Prog *1
Feature Manual References
5.1.6 Manager Features
Message Waiting
• 9.16 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-SIPEXT
• 10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—Message Waiting Set /
Cancel / Call Back
• 10.6.3 PBX Configuration—[2-6-3] System—Numbering Plan—B/NA DND Call Feature—Message
Waiting Set
• 10.9 PBX Configuration—[2-9] System—System Options
– Option 3—Dial Tone—Distinctive Dial Tone
– Option 5—SLT—Message Waiting Lamp Pattern
• 12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 8—SLT
MW Mode
• 12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button—Type
• 12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button—Type
Feature Manual References
2.20.1 Message Waiting
Multiple Subscriber Number (MSN) Ringing Service
• 18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings—DDI / DID / TIE / MSN
Feature Programming References
PC Programming Manual 715