Panasonic KX-NS300 - 11.11.2 PBX Configuration-[3-11-2] Group-VM(DPT) Group-Unit Settings; 11.11.2.1 PBX Configuration-[3-11-2] Group-VM(DPT) Group-Unit Settings-Member List

Name Description
Value
Range
Links
Transfer
Recall to
Mailbox
Enables the PBX to send the mailbox
number of the transfer destination
extension to the VPS in these
situations: (1) when a call is
transferred to an extension by the Call
Transfer without Announcement
feature using the Automated Attendant
(AA) service of the VPS, and the call is
not answered within a programmed
time period; (2) when the VPS is
assigned as the Transfer Recall
destination of a certain extension.
When the VPS receives the mailbox
number, the VPS answers the call with
the appropriate mailbox.
Disable,
Enable
PC Programming Manual
References
9.22 PBX Configuration—[1-1]
Configuration—Slot—Port Property
—Extension Type
Feature Manual References
2.28.1 Voice Mail (VM) Group
2.28.3 Voice Mail DPT (Digital)
Integration
11.11.2 PBX Configuration—[3-11-2] Group—VM(DPT) Group—
Unit Settings
A VM (DPT) group has a floating extension number, which can be assigned as the destination for redirected
calls and incoming calls.
To assign extension numbers to the group, click Member List. To view a list of all programmed extension
numbers and types, click Extension List View.
Name Description Value Range Links
Floating
Extension
No.
Specifies the floating
extension number of the
VM (DPT) group.
Max. 5 digits
(consisting of
0–9)
PC Programming Manual
References
9.22 PBX Configuration—[1-1]
Configuration—Slot—Port Property—
Extension Type
Feature Manual References
2.28.1 Voice Mail (VM) Group
2.28.3 Voice Mail DPT (Digital) Integration
Group
Name
Specifies the name of the
VM (DPT) group, which
will be shown on the
display of extensions that
call the VM (DPT) group.
Max. 20
characters
PC Programming Manual
References
9.22 PBX Configuration—[1-1]
Configuration—Slot—Port Property—
Extension Type
Feature Manual References
2.28.1 Voice Mail (VM) Group
2.28.3 Voice Mail DPT (Digital) Integration
11.11.2.1 PBX Configuration—[3-11-2] Group—VM(DPT) Group—Unit
Settings—Member List
Displays information on the settings of all relevant ports. Only ports set to VM(DPT) in DPT Type—Type of
9.22 PBX Configuration—[1-1] Configuration—Slot—Port Property—Extension Type will be displayed. In
11.11.2 PBX Configuration—[3-11-2] Group—VM(DPT) Group—Unit Settings
418 PC Programming Manual