Name Description Value Range Links
Remaining
Number of Digits
Specifies the number of digits to be dialled following
the leading number to access the destination.
0–29
GW No./GW
Group Selection
Specifies the type of destination when making calls: a
gateway device or a gateway group.
GW Group, GW
No.
GW Group Specifies the number of the destination gateway group.
This setting is only available when GW No./GW Group
Selection on this screen is set to GW Group.
1–256
GW No. Specifies the number of the destination gateway
device. This setting is only available when GW No./GW
Group Selection on this screen is set to GW No..
1–512
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System
Property—Site
The properties of the PBX site can be specified. When you place the mouse cursor over the System
Property button and click the Site button, the Main and NSVM buttons are displayed. Click a button to open
that site property screen.
Main
Name Description Value Range Links
Site Name Indicates the site name of the PBX
(reference only).
Site Name
Location (MIB) Indicates the MIB info -
SysLocation setting in
27.3.3 Network Service—[3-3]
Client Feature—SNMP Agent
(reference only).
Max. 255 characters
PBX Region Indicates the region of the PBX
(reference only).
PBX Region
IP Address Indicates the IP address of the
PBX (reference only).
1.0.0.0 -
255.255.255.255
MAC Address Indicates the MAC address of the
PBX (reference only).
00:00:00:00:00:00–
FF:FF:FF:FF:FF:FF
PBX Version Indicates the software version of
the PBX (reference only).
0000.00000 -
9999.99999
Data Version Indicates the version number of
the data (reference only).
0000.0000 - 9999.9999
SRAM Version Indicates the version number of
the SRAM (reference only).
000 - 999
System Up 
Time
Indicates the system up time
(reference only).
Days, Hours and
Minutes
Storage
Memory Size
Indicates the size of the installed
storage memory card (reference
only).
Card Size
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site
168 PC Programming Manual