Panasonic KX-NS300 - Page 169

Name Description Value Range Links
Area ID for
logical partition
Specifies the area ID for the
Logical Partitioning feature.
1 - 16
PC Programming
Manual
References
7.3.5 Utility—Log—
Call Control Log
10.9 PBX
Configuration—[2-9]
System—System
Options—Option 2—
Applying logical
partitioning
Feature Manual
References
2.11.8 Trunk Call
Limitation
P2P Group Specifies the peer-to-peer group of
the site.
1–32
Feature Manual
References
5.2.3 Peer-to-Peer
(P2P) Connection
P2P Group
Name
Indicates the selected peer-to-peer
group’s name (reference only).
P2P Group Name
Feature Manual
References
5.2.3 Peer-to-Peer
(P2P) Connection
LLDP Packet
Sending Ability
Specifies whether the PBX notifies
IP-CSs (KX-NS0154 only) to
enable or disable the ability to
send and receive LLDP packets.
Disable, Enable
IP Terminal
Registration
Mode
Specifies the IP terminal
registration mode for registering IP
telephones to the PBX.
Manual, Full Automatic,
Extension Input
Installation
Manual
References
5.4.1 Easy Setup
Wizard
IP-CS
Registration
Mode
Specifies the registration mode for
registering IP-CSs to the PBX.
Manual, Full Automatic
SIP over TCP/IP
(V-SIPGW) *)
Specifies whether or not to use
SIP over TCP/IP protocol for the
site. When this setting is enabled,
SIP trunks cannot use the UDP/IP
protocol.
Note
If this setting is changed, the
V-IPGW cards and/or
V-SIPGW cards installed at the
site will be deleted.
Disable, Enable
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site
PC Programming Manual 169