Panasonic KX-NS300 - 9.31 PBX Configuration-[1-1] Configuration-Slot-Card Property-E1 type MFC-R2 Setting 2

9.31 PBX Configuration—[1-1] Configuration—Slot
—Card Property—E1 type MFC-R2 Setting 2
Name Description Value Range Links
Group-A Code
Assignment—Address
Complete
Specifies the address complete (completion of
dial reception) code sent to the telephone
company.
1–15
Group-A Code
Assignment—ANI
Request
Specifies the code used to request the telephone
company to send an ANI number.
1–15
Group-A Code
Assignment—ANI (N+1)
Specifies the code used to request the telephone
company to send the (N+1)th digit of an ANI
number.
1–15
Group-A Code
Assignment—ANI (N+1)
Additional Code
Specifies the second code when two codes are
needed to request the telephone company to
send the (N+1)th digit of an ANI number.
Undefined, 1–
15
Group-A Code
Assignment—Set up
Speech Path
Specifies the setup speech path code sent to the
telephone company.
Undefined, 1–
15
Group-A Code
Assignment—(First)
Request
Specifies the code used to request the telephone
company to send the first digit of an ANI number.
Undefined, 1–
15
Group-A Code
Assignment—(N)
Request
Specifies the code used to request the telephone
company to send the (N)th digit of an ANI
number.
Undefined, 1–
15
Group-A Code
Assignment—(N-1)
Request
Specifies the code used to request the telephone
company to send the (N-1)th digit of an ANI
number.
Undefined, 1–
15
Group-A Code
Assignment—(N-2)
Request
Specifies the code used to request the telephone
company to send the (N-2)th digit of an ANI
number.
Undefined, 1–
15
Group-A Code
Assignment—(N-3)
Request
Specifies the code used to request the telephone
company to send the (N-3)th digit of an ANI
number.
Undefined, 1–
15
Group-B Code
Assignment—Idle (1)
Specifies the code used normally to inform the
telephone company that the status of the called
destination is idle.
Undefined, 1–
15
Group-B Code
Assignment—Idle (2)
Specifies the code used in special
circumstances, such as an international call, to
inform the telephone company that the status of
the called destination is idle.
Undefined, 1–
15
Group-B Code
Assignment—Idle (3)
Specifies the code used to inform the telephone
company that the status of the called destination
is idle when the call is disconnected by the caller.
Undefined, 1–
15
9.31 PBX Configuration—[1-1] Configuration—Slot—Card Property—E1 type MFC-R2 Setting 2
PC Programming Manual 293