Panasonic KX-NS300 - 9.36 PBX Configuration-[1-3] Configuration-Option

9.36 PBX Configuration—[1-3] Configuration—
Option
System options can be programmed.
Name Description Value Range Links
System Wireless
—System ID
Indicates the radio system ID used to
register a PS (reference only).
To clear the System ID
1.
Click the Clear Master CS button.
2.
A warning will be displayed.
Confirm the contents of the
warning, and then click Yes.
Note
The System ID can be cleared
using this procedure only in Off-
line mode.
Not applicable.
System Wireless
—CO Status
Display in
Standby
(KX-WT125 only)
(Need System
Restart)
Selects whether to display the CO
status on the LCD of the PS when in
stand-by mode (KX-WT125 only).
Note
• The KX-WT125 is available
only in Canada.
• For users in Canada, this
setting is also available for the
KX-WT126.
Enable, Disable
New Card
Installation—Card
Status for any
Card
Selects the initial status of cards after
installation.
In Service, Out of
Service
New Card
Installation—
Automatic
Extension
Number Set for
Extension Card
Selects whether extension numbers
are assigned to extension ports
automatically or manually.
Disable, Enable
9.36 PBX Configuration—[1-3] Configuration—Option
304 PC Programming Manual