Item Description
Port No. Number of the port.
RTP Receive Packet Counter Total number of packets received.
RTP Receive Lost Packet Counter Total number of packets lost.
RTP Receive Abandoned Packet Counter Total number of packets abandoned.
RTP Arrive Packet Interval (MAX.) [ms] Maximum time taken for a packet to arrive.
RTP Arrive Packet Interval (MIN.) [ms] Minimum time taken for a packet to arrive.
To view IP extension information
1.
From the Card Selection drop-down list, select the slot number for the card.
2.
Click Execute.
The statistical information will be displayed.
3.
Select an option:
• Click Capture if you want to save the displayed information.
1. Enter a file name, or select a file to overwrite.
2. Click Save.
• Click Clear to erase the information and reset the Collection Started Time.
4.
Click Cancel to return to the main screen.
7.5.3 Utility—Report—UM View Reports
Unified Messaging (UM) system reports can be generated in order to monitor voice mail operations. Reports
can be displayed on a PC, printed, or exported.
This screen can be accessed only in On-line mode.
To view a report
1. In the View Report tab, select the desired report from the Report Parameters drop-down list.
2. Specify a range of mailbox numbers in the From and To boxes, or click Select all mailboxes.
3. Click View Report.
Some reports can be viewed as a table or as a graph. For these reports, select "Table" or "Graph"
under View As before clicking View Report.
To export a report
A report can be printed from Web Maintenance Console or exported as a text file or CSV file.
1. When viewing a report, select Print Out (PC), Text, or Comma-separated values (CSV) from the
drop-down menu.
2. Click Export.
3. If you select Print Out (PC):
A print command is sent to the PC. Follow any prompts to print the report.
If you select Text or Comma-separated values (CSV):
A file save dialogue is displayed. Specify the folder to export the report file to.
To clear a report
For each report, all data can be cleared. Follow the steps below to clear all report data. Some reports can
also be set to automatically clear at specified times.
7.5.3 Utility—Report—UM View Reports
118 PC Programming Manual
To Next Page
Loading...
