Panasonic KX-NS300 - 18.3.2 PBX Configuration-[10-3] CO & Incoming Call-DDI; DID Table-Name Generate

Name Description Value Range Links
Beginning
Entry Location
Specifies the number of the first
location to be programmed.
1–1000
PC Programming Manual
References
18.3 PBX Configuration—[10-3]
CO & Incoming Call—DDI / DID
Table
Feature Manual References
2.1.1.3 Direct Inward Dialling
(DID)/Direct Dialling In (DDI)
Generate
DDI/DID
Number
(From)
Specifies the DID number of the
first location to be programmed.
DDI/DID numbers for subsequent
locations will be generated
automatically, by adding one to
the value of the previous location.
Max. 32
digits
(consisting of
0–9)
PC Programming Manual
References
18.3 PBX Configuration—[10-3]
CO & Incoming Call—DDI / DID
Table
Feature Manual References
2.1.1.3 Direct Inward Dialling
(DID)/Direct Dialling In (DDI)
Number of
Registration
Specifies the number of locations
to be programmed.
1–1000
PC Programming Manual
References
18.3 PBX Configuration—[10-3]
CO & Incoming Call—DDI / DID
Table
Feature Manual References
2.1.1.3 Direct Inward Dialling
(DID)/Direct Dialling In (DDI)
Destination—
Day, Lunch,
Break, Night
Specifies the number of the
DDI/DID destination in each time
mode for the first location to be
programmed. If the same
destination is to be used for all
locations for a certain time mode,
click the appropriate Same all
check box. If the Same all check
box for a certain time mode is not
clicked, the destination numbers
for subsequent locations will be
generated automatically, by
adding one to the value of the
previous location for that time
mode.
Max. 5 digits
(consisting of
0–9)
PC Programming Manual
References
18.3 PBX Configuration—[10-3]
CO & Incoming Call—DDI / DID
Table
Feature Manual References
2.1.1.3 Direct Inward Dialling
(DID)/Direct Dialling In (DDI)
18.3.2 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID
Table—Name Generate
Name Generate allows DDI/DID names to be programmed at once for a set of locations in series.
If a name generated here is longer than 20 characters, the additional characters will be discarded.
18.3.2 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table—Name Generate
PC Programming Manual 543