Panasonic KX-NS300 - 16.5 PBX Configuration-[8-5] ARS-Carrier

16.5 PBX Configuration—[8-5] ARS—Carrier
Carrier
It is possible to specify how user-dialled numbers are modified for connecting to the appropriate carrier. A
maximum of 48 different carriers can be programmed to be used with the ARS feature.
Name Description Value Range Links
Carrier Name Specifies the carrier name. Max. 20
characters
Feature Manual
References
2.8.1 Automatic Route
Selection (ARS)
Removed
Number of
Digits
Specifies the number of leading digits to
remove from the user-dialled number.
0–15
Feature Manual
References
2.8.1 Automatic Route
Selection (ARS)
Modify
Command
Specifies the commands to modify the
user-dialled number to access the
carrier. For details of each command,
see the Feature Manual.
Max. 16
characters
(consisting of 0–9,
*, #, C, P, A, G, I
and H)
Feature Manual
References
2.8.1 Automatic Route
Selection (ARS)
CLIP Table
No.
Sets the CLIP numbers established for
each extension (wired/wireless) of a
carrier. The CLIP IDs for each CLIP
number are set in 12.1.7 PBX
Configuration—[4-1-7] Extension—
Wired Extension—CLIP ID Table and
12.2.5 PBX Configuration—[4-2-5]
Extension—Portable Station—CLIP
ID Table.
1–8
Feature Manual
References
2.8.1 Automatic Route
Selection (ARS)
Carrier
Access Code
Specifies the carrier access code. The
carrier access code can be added to the
user-dialled number by specifying "C" in
Modify Command on this screen.
Max. 32 digits
(consisting of 0–9,
*, #, and P
[Pause])
Feature Manual
References
2.8.1 Automatic Route
Selection (ARS)
TRG Priority
Selects the order in which trunk groups are seized when making calls via each carrier.
Name Description Value Range Links
Trunk Group—
Priority 1–Priority 4
Specifies which trunk group is
seized in the order of priority 1 to
priority 4.
None, 1–64
Feature Manual
References
2.8.1 Automatic Route
Selection (ARS)
TRG 01–TRG 64
Selects the trunk groups that connect to the carrier.
16.5 PBX Configuration—[8-5] ARS—Carrier
522 PC Programming Manual