Panasonic KX-NS300 - 27.2.3 Network Service-[2-4] Server Feature-HTTP; 27.2.4 Network Service-[2-5] Server Feature-NTP

Name Description Value Range Links
Connection Control
—Control Port
number
Specifies the port number for connecting
to the PBX’s FTP server.
21, 990, 1024–65535
Data Transfer Port
—Port number
(Minimum)
Specifies the minimum port number for
FTP data transfer.
1024–65535
Data Transfer Port
—Port number
(Maximum)
Specifies the maximum port number for
FTP data transfer.
1024–65535
User Information—
User Name
Specifies the user name for the PBX’s
FTP server authentication.
Note
Be sure to change the user name from
its initial, default value. Also, for
security reasons, change the user
name regularly.
Max. 24 characters (a–z, 0–
9, [hyphen], [underscore])
Note
The first character must
be a letter (a–z).
User Information—
Password
Specifies the password for the PBX’s FTP
server authentication.
Note
Be sure to change the password from
its initial, default value. Also, for
security reasons, change the
password regularly.
Max. 24 characters (A–Z, a–
z, 0–9, [hyphen],
[underscore])
Note
The first character must
be a letter or number.
27.2.3 Network Service—[2-4] Server Feature—HTTP
HTTP server settings can be programmed.
Name Description Value Range Links
HTTP (LAN)—Port
Number
Specifies the port number for HTTP connections using
the LAN ports. This port is used for accessing the
PBX for Web Maintenance Console programming.
80, 1024–65535
HTTPs (LAN)—
HTTPs server
Enables or disables HTTPs for connections to the
LAN ports using the PBX’s HTTP server function.
Disable, Enable
HTTPs (LAN)—
Port Number
Specifies the port number for HTTPs connections.
This port is used for accessing the PBX for Web
Maintenance Console programming when using a
TLS connection.
443, 1024–65535
Automatic logout
Timer (min)
Specifies the amount of time required to elapse before
logging off an inactive connection from the HTTP
server.
5, 10, 30, 60×n
(n=1–24)
(minutes)
27.2.4 Network Service—[2-5] Server Feature—NTP
NTP server settings for use with KX-UT series SIP phones can be programmed.
27.2.3 Network Service—[2-4] Server Feature—HTTP
664 PC Programming Manual