25.1 UM Configuration—[6] H/W Settings
Global Parameters
Global parameters define the settings that affect integration with other PBX operations.
Name Description Value Range Links
Maximum Time to Wait
for Dial Tone (500-20000
ms, *100 ms)
Specifies the length of time that the system waits
for dial tone detection.
5–200 (× 100
ms)
Delay After Dialling
Before Onhook (0-250 s)
Specifies the length of time that the system waits
for an answer when making an outside call. If no
answer is detected, the system disconnects the
call.
0–250 s
DTMF Cut Length (0-500
ms)
Specifies the length of time for DTMF to be
deleted when it is detected while recording.
0–500 ms
Minimum Message
Length (0-9 s)
Specifies the minimum message recording length.
Messages shorter than the specified minimum
recording length are discarded from the mailbox.
0–9 s
25.1 UM Configuration—[6] H/W Settings
654 PC Programming Manual