Panasonic KX-NS300 - 16.1 PBX Configuration-[8-1] ARS-System Setting

16.1 PBX Configuration—[8-1] ARS—System
Setting
Automatic Route Selection (ARS) automatically selects the appropriate carrier at the time a trunk call is
made, according to the programmed settings. The user-dialled number will be checked and modified in
order to connect it to the appropriate carrier.
Name Description Value Range Links
ARS Mode Selects the condition to
determine when to
operate ARS.
Off: ARS is disabled.
On for Local Access Operation:
ARS operates when an extension
user makes a call using Idle Line
Access method.
On for Any CO Access Operation:
ARS operates when an extension
user makes a call using Idle Line
Access, Trunk Access, or S-CO
Line Access method.
Feature Manual
References
2.5.5.3 Trunk
Access
2.8.1 Automatic
Route Selection
(ARS)
Mode When Any
Carrier is not
programmed for
the Dial
Selects what happens
when the dialled number
is not found in Leading
Number in 16.2 PBX
Configuration—[8-2]
ARS—Leading
Number.
Disconnect: the line will be
disconnected.
Local Access: the dialled number
will be handled by Idle Line Access
method.
Feature Manual
References
2.8.1 Automatic
Route Selection
(ARS)
16.1 PBX Configuration—[8-1] ARS—System Setting
518 PC Programming Manual