Name Description Value Range Links
Forward /
DND—For
internal calls
Specifies the FWD/DND setting for
internal calls.
If Always (All), Busy, No Answer, or
Busy / No Answer is selected, the FWD
destination field can be set.
If For both external calls and internal
calls is checked, this setting becomes
unavailable, and the value set for external
calls is applied to internal calls.
Always (All),
Busy, No
Answer, Busy /
No Answer, Do
Not Disturb, Off
Feature Manual
References
2.3.1 Call Forwarding
(FWD)/Do Not Disturb
(DND)—SUMMARY
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—
Flexible Button
Each flexible button can be customised to allow one-touch access to a certain feature. A maximum of 12
flexible buttons can be customised for each PS. Select the desired PS from the Extension Number / Name
list.
To copy values from one location to another, click the Copy to button.
For more information on flexible buttons, see "2.21.2 Flexible Buttons" in the Feature Manual.
Name Description Value Range Links
Type Specifies the feature to be
assigned to the flexible button.
Not Stored, Loop CO,
Single CO, Group
CO, DSS, One-touch,
ICD Group, Message
Waiting, FWD/DND
(Both), FWD/DND
(External), FWD/DND
(Internal), Group Fwd
(Both), Group Fwd
(External), Group
Fwd (Internal),
Account, Conference,
Terminate, EFA,
Charge, Call Park,
Log-in/Log-out,
Hurry-up, Wrap-up,
Time Service, TRS
Level Change, ISDN
Service, CLIR,
COLR, ISDN Hold,
Time Service -
Automatic/Manual,
Two-way Record,
Two-way Transfer,
LCS, Voice Mail
Transfer, NDSS, CTI,
PDN, SDN
PC Programming
Manual References
12.2.3.1 PBX
Configuration—[4-2-3]
Extension—Portable
Station—Flexible Button
—Flexible button data
copy
Parameter
Selection (for
Single CO)
Specifies the trunk to be
accessed.
1–160
Feature Manual
References
2.5.5.3 Trunk Access
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button
PC Programming Manual 467
To Next Page
Loading...
