Panasonic KX-NS300 - Page 468

Name Description Value Range Links
Parameter
Selection (for
Group CO)
Specifies the trunk group to be
accessed.
1–64
Feature Manual
References
2.5.5.3 Trunk Access
Parameter
Selection (for
Call Park)
Specifies whether a call is
parked in an idle parking zone
automatically, or in a specific
parking zone.
Automatic, Specific
Feature Manual
References
2.13.2 Call Park
Parameter
Selection (for
Log-in/Log-out)
Specifies which incoming call
distribution groups that the PS
belongs to are logged in to or
logged out from.
None: The incoming
call distribution group
is selected manually.
All: All incoming call
distribution groups
that the PS belongs
to.
Incoming Group: A
pre-specified
incoming call
distribution group
Feature Manual
References
2.2.2.8 Log-in/Log-out
Parameter
Selection (for
Time Service)
Selects which time modes are
switched manually.
All (Day/Night/Lunch/
Break), Day/Night/
Break, Day/Night/
Lunch, Day/Night
Feature Manual
References
5.1.4 Time Service
Parameter
Selection (for
TRS Level
Change)
Specifies the TRS/Barring level
to be used temporarily on a
certain PS.
Level 1–Level 7
Feature Manual
References
2.7.1 Toll Restriction
(TRS)/Call Barring
(Barring)
2.7.4 Dial Tone Transfer
Parameter
Selection (for
Time Service -
Automatic/
Manual)
Specifies the Time Table to be
used when the Time Service
Switching Mode is set to
Automatic.
Table 1–Table 8
Feature Manual
References
5.1.4 Time Service
Parameter
Selection (for
SDN)
Specifies the delayed ringing
setting for calls arriving at an
SDN button.
The value specified here is only
used when System Wireless—
SDN Delayed Ringing with
LCD on 10.9 PBX
Configuration—[2-9] System—
System Options is set to
"Enable".
Immediate, 1 Ring, 2
Rings, 3 Rings, 4
Rings, 5 Rings, 6
Rings, No Ring
PC Programming
Manual References
10.9 PBX Configuration—
[2-9] System—System
Options—Option 4—
System Wireless—SDN
Delayed Ringing with
LCD
Feature Manual
References
2.9.1 Primary Directory
Number (PDN)/
Secondary Directory
Number (SDN) Extension
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button
468 PC Programming Manual