14.4 PBX Configuration—[6-4] Feature—Second
Dial Tone
A programmed Pause time can be inserted automatically between the Second Dial Tone Waiting code and
the following digits. When a programmed Second Dial Tone Waiting code is dialled after seizing a trunk, a
pre-programmed number of pauses are inserted after the code.
A maximum of 100 Second Dial Tone Waiting codes can be programmed. 20 codes are displayed at a time.
To display other sets of codes, click the applicable tab.
Name Description Value Range Links
Second Dial Tone
Waiting Code
Specifies the Second Dial Tone
Waiting code.
Max. 4 digits
(consisting of 0–9, *,
and #)
Feature Manual
References
2.5.4.7 Pause Insertion
Pause Repeating
Counter
Specifies the number of pauses
to be inserted when waiting for
the second dial tone.
0–20
Feature Manual
References
2.5.4.7 Pause Insertion
14.4 PBX Configuration—[6-4] Feature—Second Dial Tone
504 PC Programming Manual
To Next Page
Loading...
