Panasonic KX-NS300 - 23.3.2 UM Configuration-[4-3] Service Settings-Custom Service-Date Control

Name Description Value Range Links
Dial by Name: Requests the
caller to enter the first 3 or 4
letters of a first or last name of
the person the caller wishes to
reach, then transfers the caller
to the corresponding extension.
Repeat Menu: Repeats the
Custom Service menu.
Main Menu: Returns the caller
to the Custom Service top
menu.
Trf to Fax Extn: Allows the
caller to send fax messages to
an extension specified as the
fax extension.
List All Names: The system
will announce the names and
extensions numbers of all
subscribers (except those
whose Class of Service
Directory Listing parameter is
set to "No").
None: No operation assigned.
Example: Assigning key [1]
to transfer to extension 101
1. Click the check box next
to key [1].
2. Select "Trf to Ext" in the
"Assigned Operation"
column.
3. Enter "101" in the "Value"
column.
Example: Cancelling the
setting for key [1]
1. Clear the check box next
to key [1].
23.3.2 UM Configuration—[4-3] Service Settings—Custom
Service—Date Control
The below parameters are set for the Date Control Custom Service in the Custom Service Builder.
This service allows you to assign a different operation for up to 5 time periods. The caller makes no
selection and no menu is announced.
23.3.2 UM Configuration—[4-3] Service Settings—Custom Service—Date Control
624 PC Programming Manual