Call Forwarding (FWD)
• 10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—FWD No Answer Timer
Set
• 10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings
– CO & SMDR—Call Forward to CO
– Manager—Group Forward Set
– Optional Device & Other Extensions—Remote Operation by Other Extension
• 10.9 PBX Configuration—[2-9] System—System Options—Option 1—PT Fwd / DND—Extension Status
of Mobile Integration (FWD NA to CO)
• 11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings—Main
– CO-CO Duration Time (*60s)
– Extension-CO Duration Time (*60s)
• 11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings—Group
Log / Group FWD
• 11.5.3 PBX Configuration—[3-5-3] Group—Incoming Call Distribution Group—Miscellaneous—Options—
2nd line LCD display information for ICD Group redirected call
• 12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—FWD / DND
• 12.1.2 PBX Configuration—[4-1-2] Extension—Wired Extension—FWD/DND
• 12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—FWD / DND
• 12.2.2 PBX Configuration—[4-2-2] Extension—Portable Station—FWD/DND
Feature Manual References
2.3.2 Call Forwarding (FWD)
Call Hold
• 10.3 PBX Configuration—[2-3] System—Timers & Counters—Dial / IRNA / Recall / Tone
– Recall—Hold Recall (s)
– Recall—Disconnect after Recall (x60s)
• 10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features
– Call Hold / Call Hold Retrieve
– Call Hold Retrieve : Specified with a Holding Extension Number
– Hold Retrieve : Specified with a Held CO Line Number
• 10.9 PBX Configuration—[2-9] System—System Options
– Option 1—PT Operation—Automatic Hold by ICM / CO / ICD Group Key
– Option 1—PT Operation—Hold key mode
– Option 5—SLT—SLT Hold Mode
Feature Manual References
2.13.1 Call Hold
Call Hold (HOLD)—by ISDN
• 10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—ISDN Hold
Feature Programming References
PC Programming Manual 689
To Next Page
Loading...
