Panasonic KX-NS300 - Page 356

Optional Device & Other Extensions
Name Description
Value
Range
Links
COS Name Specifies the name
of the COS.
Max. 20
characters
Feature Manual References
5.1.1 Class of Service (COS)
Door Unlock Enables using the
door opener feature.
Disable,
Enable
PC Programming Manual References
12.1.1 PBX Configuration—[4-1-1] Extension—
Wired Extension—Extension Settings—Main—
COS
12.2.1 PBX Configuration—[4-2-1] Extension—
Portable Station—Extension Settings—Main—
COS
Feature Manual References
2.18.2 Door Open
External
Relay Access
Enables access to
external relays.
Disable,
Enable
PC Programming Manual References
13.4 PBX Configuration—[5-4] Optional Device
—External Relay
Feature Manual References
2.18.4 External Relay Control
Accept the
Call from
DISA
Enables reception of
calls from DISA.
Disable,
Enable
PC Programming Manual References
12.1.1 PBX Configuration—[4-1-1] Extension—
Wired Extension—Extension Settings—Main—
COS
12.2.1 PBX Configuration—[4-2-1] Extension—
Portable Station—Extension Settings—Main—
COS
13.3.2 PBX Configuration—[5-3-2] Optional
Device—Voice Message—DISA Message
Feature Manual References
2.16.1 Direct Inward System Access (DISA)
Remote
Operation by
Other
Extension
Allows the Walking
COS feature to be
used from a remote
location (inside the
PBX, or outside the
PBX using DISA).
Allow, Deny
PC Programming Manual References
12.1.1 PBX Configuration—[4-1-1] Extension—
Wired Extension—Extension Settings—Main—
COS
12.2.1 PBX Configuration—[4-2-1] Extension—
Portable Station—Extension Settings—Main—
COS
Feature Manual References
2.7.5 Walking COS
Accept
Wireless XDP
Parallel Mode
Set by PS
Allows Wireless XDP
Parallel Mode to be
set by a PS.
Allow, Deny
PC Programming Manual References
12.1.1 PBX Configuration—[4-1-1] Extension—
Wired Extension—Extension Settings—Main—
COS
Feature Manual References
5.2.4.5 Wireless XDP Parallel Mode
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings
356 PC Programming Manual