9.2 PBX Configuration—[1-1] Configuration—Slot—
System Property
9.2.1 PBX Configuration—[1-1] Configuration—Slot—System
Property—Main
The properties of the PBX system can be specified.
Main
Name Description
Value
Range
Links
DSP CODEC G.711
only (SIP extension)
Specifies whether or not to only use the
G.711 codec for SIP extension calls.
Enable,
Disable
DSP CODEC G.711
only (IP-GW)
Specifies whether or not to only use the
G.711 codec for IP trunk calls.
Enable,
Disable
DSP CODEC
Priority-1 value only
(others)
Specifies whether or not to only use the
priority 1 codec set for the following
types of calls:
• IP extension calls
• SIP trunk calls
Enable,
Disable
System Speed Dial
Download For UT
Extensions
Specifies the maximum number of
system speed dial entries that will be
downloaded to KX-UT series SIP
phones.
0–300
PC Programming
Manual References
9.20 PBX Configuration
—[1-1] Configuration—
Slot—Port Property—
V-UTEXT—Option—
System Speed Dial
Download
System Status
Name Description Value Range Links
CPU Usage Displays the system CPU’s current processor load, expressed
as a percentage of total capacity (reference only).
0–100%
Memory Usage Displays the amount of system memory currently being used,
displayed as a percentage of total capacity (reference only).
0–100%
SD card Usage Displays the amount of SD Memory Card memory currently
being used, displayed as a percentage of total capacity
(reference only).
0–100%
V-IPGW
Name Description Value Range Links
Call Signalling Model Specifies whether to carry out a call control
(H.225) process directly between the cards
or through a gatekeeper.
Direct, GateKeeper
9.2 PBX Configuration—[1-1] Configuration—Slot—System Property
164 PC Programming Manual
To Next Page
Loading...
