Name Description Value Range Links
Others—FWD to
the VPS
Sequence
Specifies which DTMF commands the
VPS receives from the PBX when a
call is forwarded to the VPS, so that
the VPS can answer the call either
with a mailbox or in the AA service
mode. It is also possible to send no
DTMF signal to the VPS.
None, Answer by
Mailbox, AA
Others—Intercept
Routing to the
VPS Sequence
Specifies which DTMF commands the
VPS receives from the PBX when a
call is intercepted to the VPS, so that
the VPS can answer the call either
with a mailbox or in the AA service
mode. It is also possible to send no
DTMF signal to the VPS.
None, Answer by
Mailbox, AA
Others—Mailbox
for Extension
Specifies whether the mailboxes use
the same numbers as the extensions
and incoming call distribution groups,
or use different numbers as
programmed for each extension or
incoming call distribution group.
Extension Number,
Programmed Mailbox
Number
PC
Programming
Manual
References
11.5.1 PBX
Configuration—
[3-5-1] Group—
Incoming Call
Distribution Group
—Group Settings
12.1.1 PBX
Configuration—
[4-1-1] Extension
—Wired
Extension—
Extension
Settings
12.2.1 PBX
Configuration—
[4-2-1] Extension
—Portable Station
—Extension
Settings
Others—Message
Waiting Lamp
Control
Specifies whether the PBX or VPS
cancels the Message Waiting feature
(e.g., turning off the MESSAGE
button light) when an extension user
answers the message waiting
notification from the VPS.
By PBX, BY VM
11.12.2 PBX Configuration—[3-12-2] Group—VM(DTMF) Group—
Group Settings
A VM (DTMF) group has a floating extension number, and can be assigned as the destination for redirected
calls and incoming calls. To assign members to the group, click Member List. To view a list of all
programmed extension numbers and types, click Extension List View.
11.12.2 PBX Configuration—[3-12-2] Group—VM(DTMF) Group—Group Settings
422 PC Programming Manual
To Next Page
Loading...
