Panasonic KX-NS300 - 13.5 PBX Configuration-[5-5] Optional Device-External Sensor

13.5 PBX Configuration—[5-5] Optional Device—
External Sensor
Settings related to external sensors can be programmed.
To assign destinations for sensor calls easily, click Destination Setting (see 2.1.6 Extension Number
Setting).
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Name Description Value Range Links
External Sensor
No.
Indicates the number of the
external sensor (reference
only).
1–8
Feature Manual
References
2.18.3 External Sensor
Name Specifies the sensor name. Max. 20
characters
Feature Manual
References
2.18.3 External Sensor
Destination—
Day, Lunch,
Break, Night
Specifies the destination
number of sensor calls for each
port in each time mode.
Max. 32 digits
(consisting of 0–
9, *, #, [ ]
[Secret], and P
[Pause])
Feature Manual
References
2.18.3 External Sensor
Tenant No. Specifies the tenant to which
the sensor belongs, to
determine the Time Table for
the sensor. (The tenant number
corresponds to the Time Table
number.)
1–8
PC Programming Manual
References
10.4 PBX Configuration—[2-4]
System—Week Table
Feature Manual
References
2.18.3 External Sensor
5.1.3 Tenant Service
Sensor Alarm—
Email
Notification
Enables e-mail notification
when the sensor detects an
alarm.
Enable, Disable
Feature Manual
References
2.18.3 External Sensor
5.1.3 Tenant Service
Sensor Alarm—
Email Address
Specifies the e-mail address
that will receive a notification
when the sensor detects an
alarm.
Max.128
characters
Feature Manual
References
2.18.3 External Sensor
5.1.3 Tenant Service
Sensor Alarm—
Email Comment
Specifies comments in the e-
mail received when the sensor
detects an alarm.
Max.256
characters
Feature Manual
References
2.18.3 External Sensor
5.1.3 Tenant Service
13.5 PBX Configuration—[5-5] Optional Device—External Sensor
PC Programming Manual 493