Name Description Value Range Links
T310 Specifies the maximum time that the PBX waits for a continuance
message after receiving the Incoming Call Proceeding message.
0–3000 × 100 ms
T313 Specifies the maximum time that the PBX waits for a reply after
sending the Connect message.
0–600 × 100 ms
T316 Specifies the maximum time that the PBX waits for a reply after
sending the Restart message.
0–3000 × 100 ms
T318 Specifies the maximum time that the PBX waits for a reply after
sending the Resume message.
0–600 × 100 ms
T319 Specifies the maximum time that the PBX waits for a reply after
sending the Suspend message.
0–600 × 100 ms
T322 Specifies the maximum time that the PBX waits for a reply after
sending the Status enquiry message.
0–600 × 100 ms
T3D3 Specifies the length of time after which the PBX tries to establish
L2 in "Permanent" mode.
0–3000 × 100 ms
T3D9 Specifies the length of time after which the PBX tries to disconnect
L2 in "Call by Call" mode.
0–3000 × 100 ms
9.11.1 PBX Configuration—[1-1] Configuration—Slot—Shelf
Property—V-IPGW—GK Settings
Gatekeeper registration information can be programmed.
Name Description Value Range Links
Destination
Number
Specifies a telephone number to register
with a gatekeeper.
Max. 30 digits (consisting of
0–9)
Device Name Specifies the name of the device for
programming reference.
Max. 20 characters
9.11.2 PBX Configuration—[1-1] Configuration—Slot—Shelf
Property—V-IPGW—Hunt Pattern
The related settings of hunt patterns can be programmed. The hunt pattern determines how to route
incoming calls through virtual IP trunks to the PBX.
A maximum of 32 hunt patterns can be programmed.
Hunt Pattern 1–16
Name Description Value Range Links
Leading
Number
Specifies the leading digits of
dialled numbers by which to
determine the call distribution
port group to direct incoming
calls.
Max. 30 digits
(consisting of 0–9)
9.11.1 PBX Configuration—[1-1] Configuration—Slot—Shelf Property—V-IPGW—GK Settings
222 PC Programming Manual
To Next Page
Loading...
