Panasonic KX-NS300 - 18.1 PBX Configuration-[10-1] CO & Incoming Call-CO Line Settings

18.1 PBX Configuration—[10-1] CO & Incoming Call
—CO Line Settings
Trunks can be assigned a name, and grouped into a maximum of 64 trunk groups.
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Name Description Value Range Links
Card Type Indicates the type of card to which the trunk is
connected (reference only).
Card type
CO Name Specifies the trunk name which is shown on the
extension’s display when receiving a call from
the trunk.
Max. 20
characters
Feature Manual
References
2.21.4 Display
Information
Trunk
Group
Number
Specifies the trunk group number to which the
trunk belongs.
When a V-IPGW card is installed, the value is
automatically set to "7" for the corresponding
trunks.
1–64
Feature Manual
References
5.1.2 Group
18.1 PBX Configuration—[10-1] CO & Incoming Call—CO Line Settings
536 PC Programming Manual