Panasonic KX-NS300 - 12.2.2 PBX Configuration-[4-2-2] Extension-Portable Station-FWD;DND

Name Description Value Range Links
Parameter—
Deleting Digits
Specifies the number of
digits to be deleted from the
start of an extension
number when using it as
part of the CLIP number.
0–4
PC Programming Manual
References
12.2.1 PBX Configuration—[4-2-1]
Extension—Portable Station—
Extension Settings
Feature Manual References
4.1.2.2 Calling/Connected Line
Identification Presentation (CLIP/
COLP)
Parameter—
Head of ID
Specifies a prefix number to
be applied to all generated
CLIP numbers.
Max. 16 digits
(consisting of
0–9, *, and #)
PC Programming Manual
References
12.2.1 PBX Configuration—[4-2-1]
Extension—Portable Station—
Extension Settings
Feature Manual References
4.1.2.2 Calling/Connected Line
Identification Presentation (CLIP/
COLP)
Parameter—
Tail of ID
Specifies a suffix number to
be applied to all generated
CLIP numbers.
Max. 16 digits
(consisting of
0–9, *, and #)
PC Programming Manual
References
12.2.1 PBX Configuration—[4-2-1]
Extension—Portable Station—
Extension Settings
Feature Manual References
4.1.2.2 Calling/Connected Line
Identification Presentation (CLIP/
COLP)
12.2.2 PBX Configuration—[4-2-2] Extension—Portable Station—
FWD/DND
For each PS, separate Call Forwarding (FWD) and Do Not Disturb (DND) settings can be programmed for
incoming intercom and trunk calls. Select the desired PS from the Extension Number / Name list.
To copy FWD/DND values from one location to another, click Copy to.
Name Description Value Range Links
Forward /
DND—For
external calls
Specifies the FWD/DND setting for
external calls.
If Always (All), Busy, No Answer, or
Busy / No Answer is selected, the FWD
destination field can be set.
Always (All),
Busy, No
Answer, Busy /
No Answer, Do
Not Disturb, Off
Feature Manual
References
2.3.1 Call Forwarding
(FWD)/Do Not Disturb
(DND)—SUMMARY
12.2.2 PBX Configuration—[4-2-2] Extension—Portable Station—FWD/DND
466 PC Programming Manual