Panasonic KX-NS300 - Page 364

Name Description Value Range Links
PT Operation—
Automatic
Answer for Call
from CO after
Specifies the number of
times a PT in Hands-free
Answerback mode will ring
before a conversation is
established automatically
when it receives a call from a
trunk.
No Ring, 1 Ring, 2
Rings, 3 Rings
Feature Manual
References
2.4.4 Hands-free
Answerback
PT Operation—
Automatic Hold
by ICM / CO /
ICD Group Key
Selects whether calls are
disconnected or held when
an INTERCOM, PDN, CO, or
ICD Group button is pressed
while having a conversation.
Disable (Disconnect),
Enable
PC Programming
Manual References
12.1.4 PBX Configuration—
[4-1-4] Extension—Wired
Extension—Flexible Button
12.2.3 PBX Configuration—
[4-2-3] Extension—Portable
Station—Flexible Button
Feature Manual
References
2.13.1 Call Hold
PT Operation—
Hold key mode
Selects which extensions
can retrieve a held call or a
call that is transferred by Call
Transfer without
Announcement feature.
Hold: Any extension
can retrieve a held
call.
Exclusive Hold: Only
the holding extension
can retrieve a held
call.
Feature Manual
References
2.13.1 Call Hold
Option 2
Name Description Value Range Links
Extension Clear
—Call Waiting
Specifies whether the Call
Waiting setting is cleared
when Extension Feature Clear
is performed.
Clear, Do not
clear
Feature Manual
References
2.24.2 Extension Feature Clear
Extension Clear
—Fwd/DND
Specifies whether the
FWD/DND setting is cleared
when Extension Feature Clear
is performed.
Clear, Do not
clear
Feature Manual
References
2.24.2 Extension Feature Clear
Extension Clear
—Hot Line (Pick-
up Dial)
Specifies whether the Hot
Line setting is cleared when
Extension Feature Clear is
performed.
Clear, Do not
clear
Feature Manual
References
2.24.2 Extension Feature Clear
CODEC—
System CODEC
Selects the codec type for
PSs.
A-Law, Mu-Law
CODEC—
Network CODEC
Selects the codec type for
ISDN lines.
A-Law, Mu-Law
10.9 PBX Configuration—[2-9] System—System Options
364 PC Programming Manual