Panasonic KX-NS300 - Page 171

Name Description
Value
Range
Links
CNG Signal Effective
Detection Width 1 (ON)
Specifies the length of time that the PBX
detects the CNG signal.
20–5000 ms
CNG Signal Effective
Detection Width 2 (OFF)
Specifies the length of time that the PBX
waits until another CNG signal is detected.
20–5000 ms
CNG Signal Fixation
Detection Counter
Specifies the number of times the CNG
signal must be detected before the PBX
proceeds the fax operation.
1–3
CNG Signal Fixation
Detection Pattern
Specifies the CNG signal pattern to be
detected before the PBX proceeds the fax
operation.
OFF, ON
CED Signal Fixation
Detection Time
Specifies the minimum length of time
required for the CED (called station
identification) signal to be detected by the
PBX.
50 × n (n=1–
100) ms
CNG Signal Effective
Detection Width 1 (ON) -
SIP Extension
Specifies the length of time that the PBX
detects the CNG signal for SIP extensions.
20 × n (n=1–
250) ms
CNG Signal Effective
Detection Width 2 (OFF) -
SIP Extension
Specifies the length of time that the PBX
waits until another CNG signal is detected
for SIP extensions.
20 × n (n=1–
250) ms
CNG Signal Fixation
Detection Counter - SIP
Extension
Specifies the number of times the CNG
signal must be detected before the PBX
proceeds the fax operation for SIP
extensions.
1–3
CNG Signal Fixation
Detection Pattern - SIP
Extension
Specifies the CNG signal pattern to be
detected before the PBX proceeds the fax
operation for SIP extensions.
Off, On
CED Signal Fixation
Detection Time - SIP
Extension
Specifies the minimum length of time
required for the CED (called station
identification) signal to be detected by the
PBX for SIP extensions.
50 × n (n=1–
100) ms
T38 FAX Transmit Level
(Network to PBX) A-Law
Specifies the transmission level of G3 fax
signals after being converted from T.38
protocol packets, when the codec used is
G.711A.
-13–2 dB
T38 FAX Transmit Level
(Network to PBX) Mu-Law
Specifies the transmission level of G3 fax
signals after being converted from T.38
protocol packets, when the codec used is
G.711Mu.
-7–8 dB
T38 FAX Transmit Level
A-Law - SIP Extension
Specifies the transmission level of G3 fax
signals after being converted from T.38
protocol packets, when the codec used is
G.711A for SIP extensions.
-13–2 dB
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site
PC Programming Manual 171