Panasonic KX-NS300 - 1.13.2 Enhanced Walking Extension

Name Description
Value
Range
Links
Resending
Time Out
(PTAP)
Specifies the length of time after which the PBX terminates
resending PTAP (Panasonic Telephony Administration Protocol)
data.
To change the value displayed here, click Common Settings
and set the desired value.
150–240 s
First Resending
Time (MGCP)
Specifies the length of time that the PBX waits before starting to
resend MGCP (Media Gateway Control Protocol) data.
To change the value displayed here, click Common Settings
and set the desired value.
500 × n
(n=1–8) ms
Resending
Time Out
(MGCP)
Specifies the length of time after which the PBX terminates
resending MGCP (Media Gateway Control Protocol) data.
To change the value displayed here, click Common Settings
and set the desired value.
75–120 s
CS Repeater
Mode
Specifies the CS Repeater Mode setting. If Normal is selected,
DECT communication will not be encrypted.
To change the value displayed here, click Common Settings
and set the desired value.
Normal,
Optional
9.17 PBX Configuration—[1-1] Configuration—Slot—Card Property—V-IPCS
PC Programming Manual 243