Name Description Value Range Links
Automatic LCD
Switch when
Start Talking
Enables the first line of the display to
show the call duration automatically
after answering a trunk call.
Disable, Enable
Feature Manual
References
2.21.4 Display
Information
Key Pad Tone Specifies whether key pad tones are
heard when dialling.
Off, On
Automatic
Answer for CO
Call
Enables the extension to answer an
incoming trunk call automatically after a
certain number of rings without going
off-hook, when Hands-free Answerback
has been set on the extension. This
setting is only effective when Forced
Automatic Answer on this screen has
been set to Off.
Disable, Enable
Feature Manual
References
2.4.4 Hands-free
Answerback
Option 6
Name Description Value Range Links
Extension
Number
Specifies the extension number of the
extension.
Max. 5 digits (consisting
of 0–9)
Extension Name Specifies the name of the extension. Max. 20 characters
Forced
Automatic
Answer
Specifies whether the extension
automatically answers all incoming calls
(both intercom and trunk calls) without
going off-hook, regardless of the Hands-
free Answerback setting.
Off, On
Flexible Button
Programming
Mode
Specifies whether the extension user
can modify all flexible buttons without
limitation, or only the One-touch Dialling
buttons. When the mode is set to One-
touch Dial, there is no need to enter "2"
before the number when customising a
One-touch Dialling button.
No Limitation, One-
touch Dial
ICM Tone Selects the ring tone for incoming calls
arriving at the INTERCOM button or
PDN buttons. Note that the ring tone
specified here is applied to all PDN
buttons on an extension.
IP-PT (except
KX-NT265/KX-NT321):
1–30
KX-NT265/KX-NT321:
1–8 (Even if ring tone
9–30 is selected, ring
tone 1 is heard.)
Other telephones: 1–8
(Even if ring tone 9–30
is selected, ring tone 2
is heard.)
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
436 PC Programming Manual
To Next Page
Loading...
