Name Description Value Range Links
Wrap-up
Timer
Specifies the length of time that must pass
after completing a call before an extension
will accept another call when logged in as a
member of an Incoming Call Distribution
Group.
This timer is used when "Options—Wrap-up
Timer based on" is set to "Extension" in
11.5.3 PBX Configuration—[3-5-3] Group—
Incoming Call Distribution Group—
Miscellaneous.
0–3000 s
PC Programming
Manual References
11.5.1.1 PBX
Configuration—[3-5-1]
Group—Incoming Call
Distribution Group—
Group Settings—
Member List—Wrap-up
Timer
11.5.3 PBX
Configuration—[3-5-3]
Group—Incoming Call
Distribution Group—
Miscellaneous—Options
—Wrap-up Timer based
on
Feature Manual
References
2.2.2.8 Log-in/Log-out
Option 9
Name Description Value Range Links
Extension Number Specifies the extension number
of the extension.
Max. 5 digits
(consisting of 0–
9)
Extension Name Specifies the name of the
extension.
Max. 20
characters
PDN Delayed
Ringing
Specifies the delayed ringing
setting for calls to a PDN
extension (an extension with
one or more PDN buttons).
Immediate, 1
Ring, 2 Rings, 3
Rings, 4 Rings, 5
Rings, 6 Rings
Feature Manual
References
2.9.1 Primary Directory
Number (PDN)/Secondary
Directory Number (SDN)
Extension
Built-in
Communication
Assistant
Specifies whether to enable or
disable the Communication
Assistant (CA) application for
each extension.
Disable, Basic
Only, Enable
PC Programming Manual
References
9.2.2 PBX Configuration—
[1-1] Configuration—Slot—
System Property—Site—Port
Number—Built-in
Communication Assistant
Server
Feature Manual
References
2.26.2 CA (Communication
Assistant)
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
PC Programming Manual 439
To Next Page
Loading...
