Button Description
Setup Screen
Clicking this button will display the Setup Screen tree view items. From the Setup
Screen, you can:
• Configure PBX hardware and virtual cards
• Programme settings for extensions and call handling
• Configure network settings and auxiliary PBX functions
• Configure the Unified Messaging (UM) system
For more information, see Setup Screen Tree View Items below.
3. Web Maintenance Console Features
Clicking these buttons provides features for Web Maintenance Console, as follows:
Button Description
Save Data
Clicking this button will save any changes made to settings to the System Memory.
Programming changes that are not saved will be lost if the PBX is reset or is turned
off. Changes may also be lost if Web Maintenance Console is suddenly terminated
or the PC running Web Maintenance Console loses power unexpectedly. Be sure to
save the data periodically while programming, especially during long programming
sessions.
System
Information
Clicking this button displays the Web Maintenance Console software version,
copyright notices, and licences.
Note
Licence information is not displayed when programming in Off-line mode.
Logout
Clicking this button will save any programming changes to the PBX’s System
Memory and log you out of Web Maintenance Console. For more information, see
2.2 Logout.
Extension
List View
Clicking this button will display the Extension List View in a separate window. For
details, see 6.5 Tool—Extension List View.
3.1 Home Screen
PC Programming Manual 55
To Next Page
Loading...
