3-54 Features
S
3 Features
If a called extension is busy, Station Hunting redirects the incoming call to an idle extension
in an extension group in numerical order. Idle extensions are automatically hunted according
to programming. The following 2 hunting types are available.
Circular hunting: The extensions are hunted one time in numerical order. If all
extensions are busy, a busy tone will be heard.
Terminate hunting: The extensions are hunted until the extension which has the
highest jack number in the group is reached. If all higher order
numbers are busy, the search will end and a busy tone will be
heard.
• One hunting type can be selected for each extension group.
• To leave the hunting group temporarily, use the Log-Out feature. To rejoin, use the
Log-In feature.
• If the called extension has set Do Not Disturb (DND), Call Forwarding or Log-Out,
Station Hunting will skip the extension. However, Station Hunting will not skip the
extension which receives the call first, even if it has set Do Not Disturb (DND) or Call
Forwarding.
• Required System Programming
[100] Hunting Group Set
[101] Hunting Type
[600] Extension Group Assignment
• Related Feature References
Call Forwarding
Do Not Disturb (DND)
Extension Group
Log-In/Log-Out
Station Hunting
☞
To Next Page
Loading...
