Panasonic KX-TA616 - Voice Mail Port for KX-TVP75;KX-TVP100

System Programming 4-15
4.2 System Programming [102]-[103]
Assigns the extension jack number(s) connected to a Panasonic Voice Processing System
(VPS) equipment (KX-TVP75/KX-TVP100). Only extension jacks 07, 08, 15 and 16 are
available.
* Extension jack number: 07, 08, 15 and/or 16 / (All 4 extension jacks)
Default All 4 extension jacks – Disable
• Feature Reference
Section 3, Features
Voice Mail Integration for KX-TVP75/KX-TVP100
2
0
1
(07, 08, 15, 16/ )
SELECT
(Enable/
Disable)
END
extension jack no.*
[102] Voice Mail Port for KX-TVP75/KX-TVP100
Enables or disables the system to send codes (DTMF signals) to the extension(s) assigned as
the Voice Mail Port in program [102] “Voice Mail Port for KX-TVP75/KX-TVP100”.
These DTMF signals indicate the state of the call (busy, answered, ringing, disconnected,
etc.) in addition to the normal call tones. They also enable the Panasonic Voice Processing
System (VPS) equipment (KX-TVP75/KX-TVP100) to immediately recognize the current
state of the call and speed up the call handling.
Default Disable
• The table on next page describes the codes (DTMF signals), call state and conditions for
the DTMF integration operation.
• Select “Plan 1” or “Plan 2” in program [009] “Extension Number Assignment”, and select
“Enable” in this program to enable the DTMF integration.
• This feature greatly improves the performance of the Panasonic KX-TVP75/KX-TVP100:
Voice Processing Systems which have been programmed for Inband Signaling. For more
information about Inband Signaling, refer to your Voice Processing System manual.
1
STORE
END
0
SELECT
3
!
!
[103] DTMF Integration for KX-TVP75/KX-TVP100
NEXT
NEXT
SELECT
To continue
STORE
☞
To continue
NEXT
PREV
or
(Enable/
Disable)