Panasonic KX-TA616 - DTMF Time

System Programming 4-31
4.2 System Programming [210]-[211]
Assigns the minimum duration of a DTMF signal sent to an outside (CO) line which is set to
the DTMF mode in program [401] “Dial Mode”.
MODE 1: 80 milliseconds
MODE 2: 160 milliseconds
Default MODE 1
0
1
2
[210] DTMF Time
NEXT
SELECT
STORE
END
(MODE1/
MODE2)
Enables or disables disconnecting an outside (CO) line if an extension user does not dial
anything within 10 seconds after an outside (CO) line is seized.
Default Disable (Does not disconnect)
• The interdigit timer assigned in program [208] “Interdigit Time” applies until the toll
restriction check is completed. When the timer expires, an outgoing outside call will be
disconnected while dialing, if “Enable” was selected in this program.
• Feature Reference
Section 3, Features
Toll Restriction
1
1
2
[211] No Dial Disconnection
NEXT
SELECT
STORE
END
(Enable/
Disable)
☞
!
!