Panasonic KX-TA616 - ARS Dial Tone Pattern Selection

System Programming 4-41
4.2 System Programming [362]-[363]
Selects the dial tone pattern, Disable (no tone), Tone1, Tone2 or Tone3, generated after
seizing an ARS outside (CO) line. The ARS feature is enabled on an outside (CO) line basis
in program [350] “ARS Selection”. The tone will stop after the first digit (except for an
account code) is dialed.
Tone1:
Tone2:
Tone3:
Default Tone1
• Feature Reference
Section 3, Features
Automatic Route Selection (ARS)
2
6
3
[362] ARS Dial Tone Pattern Selection
NEXT
STORE
END
(Disable/Tone1/
Tone2/Tone3)
SELECT
1 s
Assigns the interdigit timer (in seconds) used while the system is checking the dialed
number for the ARS feature.
Default 5 seconds
• This assignment should be the same as the interdigit timer assigned in program [208]
“Interdigit Time”.
• Feature Reference
Section 3, Features
Automatic Route Selection (ARS)
3
6
3
[363] ARS Interdigit Time
NEXT
STORE
END
(1 ··· 20)
time
☞
☞
!
!