Panasonic KX-TA616 - DSS Console; Emergency Call

Features 3-27
3 Features
D-E
DSS Console
The Direct Station Selection (DSS) Console provides direct access to extensions, a busy
lamp display, as well as 16 PF (Programmable Feature) buttons.
The DSS Console must be programmed to work with a proprietary telephone (PT). The jack
number of the DSS Console and its associated PT are assigned in programs [003] and [004].
Up to 2 consoles can be installed per system.
If a feature like One-Touch Dialing is assigned to a DSS button or PF button, accessing the
feature can be done easily by pressing the corresponding button. This is very useful for an
operator or manager. Refer to the Operating Instructions for more details.
• Programming the DSS and PF buttons can be done only from the paired telephone.
• Indicating the Forward (FWD) or Do Not Disturb (DND) status of corresponding
extensions using a DSS button indication is programmable in [112].
• Connection Reference
2.8 Extension Connection
• Required System Programming
[003] DSS Console Port Assignment
[004] Paired Telephone Assignment for DSS Console
[112] DSS Console Indication Mode
• Operating Instructions Reference
1.9 DSS Console Features
☞
!
!
Emergency Call
Allows an extension user to access a pre-assigned emergency number which can be dialed
regardless of any restrictions.
• Up to 5 emergency numbers can be stored.
• An emergency call is allowed even in the following cases;
— in Account Code Modes (Verify–All and Forced modes),
— in any toll restriction COS number, and
— in Electronic Station Lockout.
• Required System Programming
[309] Emergency Dial Number Set
• Related Feature References
Account Code Entry, Toll Restriction, Station Lock
• Operating Instructions Reference
1.3 Making Calls, “Making Emergency Calls (Emergency Call)”
☞
!
!