4-26 System Programming
[126]-[127] 4.2 System Programming
[126] DSS Off-Hook Mode
Enables or disables making an intercom call just by pressing a DSS button on a DSS
Console. If enabled, going off-hook is not needed.
.
Default Enable
• This assignment is also effective for a flexible CO button on a proprietary telephone
assigned as a DSS button.
• Feature Reference
Section 3, Features
Intercom Calling
(Enable/
Disable)
☞
[127] Pickup Group Set
Enables or disables the ability of an extension to pickup a call ringing at another extension
(if it is in the same extension group) by just going off-hook. If enabled, the feature number
(40) is not needed to pickup the call.
* Extension group number: 1 through 8 / (all extension groups)
Default All extension groups – Disable (the feature number (40) is required to pickup
the call)
• To prevent other extensions in the same extension group from picking up outside calls by
just going off-hook, select “Disable” in program [109] “CO Indicator Assignment”. Then
even though “Enable” is selected in this program [127], outside calls cannot be picked up
by others by just going off-hook.
• Feature Reference
Section 3, Features
Call Pickup
☞