Panasonic KX-TA616 - Hunting Group Set

4-14 System Programming
[100]-[101] 4.2 System Programming
Enables or disables automatically locating an idle extension in the same extension group as
the dialed extension, when the called extension is busy. If “Enable” is selected, assign the
next program [101] “Hunting Type”. Extension groups are defined in program [600]
“Extension Group Assignment”.
* Extension group number: 1 through 8 / (all extension groups)
Default All extension groups – Disable
• Feature Reference
Section 3, Features
Station Hunting
Assigns the hunting type, Terminate or Circular, to each extension group when a hunting
group is enabled in program [100] “Hunting Group Set”.
* Extension group number: 1 through 8 / (all extension groups)
Default All extension groups – Terminate
• Feature Reference
Section 3, Features
Station Hunting
(1···8/ )
[100] Hunting Group Set
0
0
1
(1···8/ )
NEXT
SELECT
[101] Hunting Type
1
0
1
NEXT
(Enable/
Disable)
SELECT
(Terminate/
Circular)
END
END
extension group no.*
extension group no.*
SELECT
To continue
NEXT
PREV
or
To continue
STORE
☞
SELECT
To continue
STORE
☞
To continue
NEXT
PREV
or